• Main Page
  • About us
  • Products
  • References
  • Offer Form
  • Contact

Monorail Crane

Monorail cranes are electric workshop hoists, installed on special profiles, manufactured as npi, ipb, hea, heb etc. or weld construction in general. It is a lifting group, which moves suspended on a straight line through an electrical motor, installed horizontally.

The most important characteristics of monorail cranes are safety, durability and ease of maintenance. Wide lifting capacities, various lifting and executing speeds, various installation choices and ability to work in different regimes, cause the cranes in this series to be preferred. Thanks to these superior characteristics, monorail cranes are used safely in more than 40 countries.

They offer light, economical and reliable solutions for carrying and stacking.

Its investment costs are lower.

They offer easy installation. Basic forces, which affect the building are lower.

. Thanks to crane runways, which connect to roof truss in monorail types with bottom hanger, it is possible to achieve much greater lifting heights.

. Rolling profile girders are used up to 18 m axis spaces and welded box girders are used for longer axis spaces.

. Cranes can be controlled either with push buttons, which move along the girders or remote control.

. Motor and reductor groups, specially manufactured for crane applications, ensure smooth starts and stops, impact free operation and durability.

They are suitable for facilities with low ceiling heights and short axis spaces.

STANDARD MONORAIL CRANES

They can be operated under simple I profiles, which almost every plant has or as machine group for single girder mobile cranes. These models, which usually move fast, are preferred for tight locations, which are not suitable for installation and operation of mobile cranes.

Planet model reductors comprise the lifting group of the system. They can be designed according to the location they will be used and nature of jobs to be performed and circumstances.

ROTATING CARRIAGE MONORAIL CRANES

If the area, where the crane will be installed, will change axis horizontally and this area is not suitable for the installation and operation of mobile cranes, rotating carriage monorail cranes, which work on cambered I profiles can be used. Turning circle of carrier pudrel must have at least a 1500 mm radius. There are two separate carriage groups in this system. Reductor can be installed on both carriage groups, according to drum size, which depends on lifting height. One of the carriage groups have fixed connection, the other one is articulated carriage, which has bearing with axial ball bearing. Carriage with rotating articulation allows the crane to rotate easier at corners here.

LOW CEILING MONORAIL CRANES

They are used for monorail cranes, where lifting height is important. It is installed on the side of drum carriage group and balancing weight can be placed on the other side, if necessary. These systems may provide an additional 500 mm lifting height, in comparison to standard monorail cranes. 








  • Portal Crane
  • Monorail Crane
  • Crane with Travelling Bridge
  • Jib Crane
  • Gantry Crane
  • Transfer Car
  • Crane Parts
  • Used Products
  • 2.el Gezer Vinçler
© 2026 Uzmanlar Crane. All Rights Reserved.
0 (332) 342 3 342
  • ® NovaNet İnteraktif